เครื่องล้างและเป่ามือ dyson airblade wash+dry WD06 แบบติดผนัง
dyson airblade wash&dry WD06 Wall TECHNICAL SPECIFICATION Basin specification The Dyson Airblade Wash+Dry hand dryer is compatible with most basin types. Ensure plugs are not installed in the basins and avoid inserts with embedded plugs (e.g. ones that swivel or elevate). Using a specially designed test method, Dyson engineers evaluated the user experience of a wide range of basin types when used with the Dyson Airblade Wash+Dry hand dryer. For further details on our recommended basins, please see the guide on our website dyson.com/docs We recommend avoiding basins with the following geometric characteristics; Flat bases immediately surrounding the drain hole. (nominally within a 60 mm radius). Sloping back and front wall transitions in relation to the base of the basin. See our pre-installation guide for further details: dyson.com/docs Basin dimensions: All basin measurements are internal unless stated otherwise. Minimum width of basin: 350 mm, Front to back-Minimum: 300 mm Minimum depth of basin: 100 mm Basin materials: Basins with highly polished surfoces should be avoided, e.g. reflective chrome. Porcelain or brushed metal is ideal. When multiple taps are installed side-by-side, tap centres should be a minimum of 580 mm apart. Standard warranty 5 year parts, 5 year labour. Electrical Input voltage/Frequency: 200-240V 50-60Hz Motor specification: 1 000W digital brush less motor Operating temperature range: 0°-40° C, 32°- 104°F Heater type: None Standby power consumption: Less than 0.5 W Construction Tap construction: Stainless steel (brushed) Under counter motor assembly construction: Moulded ABS (main unit) Exterior screw type: Torx Tl 5 Water ingress protection to IP35 Filter HEPA filter (glass fibre and fleece prelayer) Captures 99.95% of particles the size of bacteria (0.1 microns) from the washroom air1 Operation Touch-free infra-red activation Hand dry time measurement: 14 seconds2 Operation lock-out period: 30 seconds Airspeed at apertures: 341 mph/549 km/h Maximum altitude: 2,000 metres / 6,562 ft. Water operation Water flow rate: 1.9 I/min normal fitted aerator. 4 I/min with low flow aerator supplied with product. Water temperature control: Thermostatic mixer recommended (not supplied) Water pressure required: 1-8 bar Equipped with automatic duty flush - every 24 hours for 60 seconds after the last use. Logistics Net weight: WD04 4.26 kg; WD06 9.51 kg Packaged weight: WD04 6.76 kg; WD06 13.65 kg Packaged dimensions: WD04 H303 X W284 X D291 mm WD06 H610 x W375 x D302 mm FLOOR Tap dimensions WD06 Length 312 mm Width 303 mm Motor bucket dimensions WD06 Height 266 mm Width 142 mm Depth 189 mm Minimum clearance Suggested installation height 955mm from finished floor to centre of tap, depending an height of basin. Check installation guide for further details. Warranty conditions The company guarantees the product for a period of 5 year from the date of purchase or delivery date. The product warranty covers only product problems caused by manufacturing. Product repair service center Sangchai Air Quality Co., Ltd. No. 88 Building B, Floor 2-3, Borommaratchachonnani Road, Chimplee Sub-district, Taling Chan District, Bangkok 10170 Telephone 0-2446-5666 Fax. 0-2446-5615 Contact Service Department Tel. 0-2446-5666
ราคาล่าสุดจากร้านค้า
ยืนยันแบรนด์ DYSON ราคาล่าสุดจาก Central ฿75,000 ตรวจสอบล่าสุด 28 กรกฎาคม 2569
| แพลตฟอร์ม | ร้านค้า | ราคา | ราคาปกติ | อัปเดตล่าสุด | ดีล |
|---|---|---|---|---|---|
 Central |
Central Online | ฿75,000 | 28 กรกฎาคม 2569 | ดูราคาที่ Central |